Changed packages: ==== ant ==== Subpackages: ant-jmf ant-scripts ant-swing - to bootstrap 13.2 we need another split because bsf depends on things that depend on junit and as antlr requires bsf, we need a 3rd step -> split ant-junit to build in between ant and ant-antlr ==== ant-junit ==== - to bootstrap 13.2 we need another split because bsf depends on things that depend on junit and as antlr requires bsf, we need a 3rd step -> split ant-junit to build in between ant and ant-antlr ==== autoyast2 ==== Version update (3.1.56 -> 3.1.57) Subpackages: autoyast2-installation - Making "second_stage" public in order to switch off second stage installation completely. Needed for bnc#886464 and bnc#892091 - 3.1.57 ==== ca-certificates-mozilla ==== Version update (1.97 -> 2.1) - Updated to 2.1 (bnc#888534) - The following 1024-bit CA certificates were removed - Entrust.net Secure Server Certification Authority - ValiCert Class 1 Policy Validation Authority - ValiCert Class 2 Policy Validation Authority - ValiCert Class 3 Policy Validation Authority - TDC Internet Root CA - The following CA certificates were added: - Certification Authority of WoSign - CA ????? - DigiCert Assured ID Root G2 - DigiCert Assured ID Root G3 - DigiCert Global Root G2 - DigiCert Global Root G3 - DigiCert Trusted Root G4 - QuoVadis Root CA 1 G3 - QuoVadis Root CA 2 G3 - QuoVadis Root CA 3 G3 - The Trust Bits were changed for the following CA certificates - Class 3 Public Primary Certification Authority - Class 3 Public Primary Certification Authority - Class 2 Public Primary Certification Authority - G2 - VeriSign Class 2 Public Primary Certification Authority - G3 - AC Raíz Certicámara S.A. - NetLock Uzleti (Class B) Tanusitvanykiado - NetLock Expressz (Class C) Tanusitvanykiado ==== cpio ==== - Improve on RPM group classification (cpio does not compress on its own per se) - Remove redundant %clean section ==== dracut ==== - Do not blindly try to touch the logfile (bnc#893219) * Add 0146-dracut.sh-corrected-logfile-check.patch - Only fix UUID= fstab parsing * Add 0147-dracut.sh-Fix-UUID-fstab-parsing-in-case-mount-optio.patch - Also fix other parsing syntax in fstab like LABEL= * Add 0148-dracut.sh-Fix-LABEL-and-other-fstab-syntax.patch - Fix up some bugs from previous commit * Add 0149-dracut.sh-Fix-fstab-parsing-again.patch - bnc#893615 * Add 0150-Find-kernel-modules-in-extra-and-weak-updates-path-a.patch - pixz does need too much memory, go back to xz in a conservative way (bnc#893981) * Add 0151-Go-back-to-xz-again-pixz-may-use-too-much-memory-whi.patch - Add some default tools to initrd when debug module is included and already provided an commented example line how to easily enable it. No functional change by default. * Add 0152-Add-a-comment-to-easily-add-debug-modules-also-add-v.patch ==== evolution-data-server ==== Subpackages: evolution-data-server-devel libcamel-1_2-49 libebackend-1_2-7 libebook-1_2-14 libebook-contacts-1_2-0 libecal-1_2-16 libedata-book-1_2-20 libedata-cal-1_2-23 libedataserver-1_2-18 typelib-1_0-EBook-1_2 typelib-1_0-EBookContacts-1_2 typelib-1_0-EDataServer-1_2 - Add 0001-Bug-735311-Adapt-to-new-Google-HTTP-restriction.patch: adapt to Google Calendar new HTTP restriction (bnc#893775, bgo#735311). ==== gfxboot ==== Version update (4.5.2 -> 4.5.4) Subpackages: gfxboot-devel - added two more texts to pot file - 4.5.4 - adjust network dialog to latest linuxrc - make 'Upgrade" translatable - 4.5.3 ==== ghostscript ==== Subpackages: ghostscript-devel ghostscript-x11 - gs does not seem to require libopenssl-devel for building. ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-x86_64-efi grub2-x86_64-xen - aarch64-reloc.patch: replace with upstream solution - remove unused patch, which's supersceded by new snapper rollback support patches * 0001-script-provide-overridable-root-by-subvol.patch * 0002-script-create-menus-for-btrfs-snapshot.patch - fix openqa boot error on separate boot partition * refresh grub2-btrfs-05-grub2-mkconfig.patch - update snapper plugin for rollback support * refresh grub2-snapper-plugin.sh - snapper rollback support patches. - rename patch * 0002-btrfs-add-ability-to-boot-from-subvolumes.patch to grub2-btrfs-01-add-ability-to-boot-from-subvolumes.patch * 0004-btrfs-export-subvolume-envvars.patch to grub2-btrfs-02-export-subvolume-envvars.patch - added patches * grub2-btrfs-03-follow_default.patch * grub2-btrfs-04-grub2-install.patch * grub2-btrfs-05-grub2-mkconfig.patch - remove patch * 0003-cmdline-add-envvar-loader_cmdline_append.patch ==== haveged ==== Subpackages: libhavege1 - Adjust the service to start early enough for all usecases. Should fix bnc#892096. ==== kde4-kgreeter-plugins ==== Subpackages: kdebase4-workspace kdebase4-workspace-devel kdebase4-workspace-ksysguardd kdebase4-workspace-liboxygenstyle kdebase4-workspace-libs kdm kwin oxygen-cursors4 python-kdebase4 - Package gui_platform plugins within libs subpackage: the plugin is not shared library but is important for some core features of KDE applications (correct filedialog, style loading, etc) ==== kernel-default ==== Version update (3.16.0 -> 3.16.1) Subpackages: kernel-default-devel - rpm/config.sh Use the same repository setup as the master branch - commit 90bc0f1 - rpm/config.sh: build against factory - commit 768ed24 - Btrfs stable updates. Pending or future 3.16.y fixes - Btrfs: read lock extent buffer while walking backrefs. - Btrfs: fix compressed write corruption on enospc. - Btrfs: fix csum tree corruption, duplicate and outdated checksums. - Btrfs: fill_holes: Fix slot number passed to hole_mergeable() call. - Btrfs: fix wrong write range for filemap_fdatawrite_range(). - Btrfs: fix wrong extent mapping for DirectIO. - btrfs: Return right extent when fiemap gives unaligned offset and len. - Btrfs: ensure tmpfile inode is always persisted with link count of 0. - Btrfs: don't monopolize a core when evicting inode. - Btrfs: fix task hang under heavy compressed write. - Refresh patches.fixes/Btrfs-Fix-memory-corruption-by-ulist_add_merge-on-32. - commit c40eb71 - Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch (bnc#887046). - commit b1e2a41 - rpm/kernel-binary.spec.in: Fix the version variables in the generated Makefile (bnc#892973) - commit 8331f47 - rpm/compress-vmlinux.sh: Do not duplicate the job of brp-99-compress-vmlinux - commit e561498 - config: arm64: Enable RTC_DRV_HID_SENSOR_TIME For consistency across ARM configs. This drags in IIO. For consistency, in turn use: CONFIG_IIO_SIMPLE_DUMMY=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_HID_SENSOR_*=m - commit 7a6e5f7 - config: armv6hl: Re-enable DWC2 USB support The config update/cleanup for v3.16-rc3 mistakenly disabled USB_DWC2, which is needed for the Raspberry Pi. Fixes: d2f49e165ca3 ("config: armv6hl: Update config for 3.16-rc3") - commit cc9f241 - config: ARM: Change RTC drivers to built-in Consistently do not build RTC drivers as modules. This fixes subtle differences between armv7hl default and lpae flavors and avoids any timing-related driver initialization issues. To make RTC_DRV_88PM80X built-in, make MFD_88PM800 built-in, too. To make RTC_DRV_PM8XXX built-in, make MFD_PM8921_CORE built-in, too. - commit cf526c8 - rpm/config.sh: Drop the ARM repo, it is covered by the ports repo - commit 84ffa90 - rpm/kernel-binary.spec.in: Fix missing quotes around %build_flavor %build_flavor can be an arbitrary string, so it needs to be quoted for string comparison. - commit 0134440 - rpm/kernel-obs-build.spec.in: Use dracut for SLE12 - commit ec64eaf - config: armv6hl: Enable DMA_BCM2835 Only bcm2835 option missing. - commit 1fd2cdd - config: armv7hl: Enable DWMAC_SUNXI for lpae flavor as well Without this, the Cubietruck has no network in LPAE mode. - commit 4f16280 - Linux 3.16.1. - commit 9353bcb - Revert "config: armv7hl: Disable OMAP DRM" This reverts commit f92487dbd7a305531e4cc54c41609b8f77a1bc30. The previous commit should fix the build error of omapdrm. - commit 07174c1 - drm: omapdrm: fix compiler errors. - commit ee3abc8 - config: armv7hl: Disable OMAP DRM To avoid errors such as: ../drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format=] DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, ^ ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format=] cc1: all warnings being treated as errors disable OMAP DRM for now. Two patches were sent upstream by Matwey V. Kornilov but didn't find their way into v3.16. Once patches are applied, revert this commit. - commit f92487d - config: arm64: Disable ARM64 crypto extensions To avoid build errors such as: ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory ../scripts/Makefile.build:411: recipe for target 'arch/arm64/crypto/aes-ce-blk.o' failed disable support for ARM64 crypto extensions for now. A patch was submitted upstream by Andreas Schwab but didn't make it into v3.16. Once that is available, this commit should be reverted. - commit 5f99cfd - config: arm64/default: make rtc-pl03[01] built-in - commit 1b1d9da - rtsx_usb: export device table (bnc#890096). - commit a29135e - Delete patches.drivers/drm-cirrus-Use-16bpp-as-default (bnc#890599). - commit 820d92f ==== kernel-desktop ==== Version update (3.16.0 -> 3.16.1) Subpackages: kernel-desktop-devel - rpm/config.sh Use the same repository setup as the master branch - commit 90bc0f1 - rpm/config.sh: build against factory - commit 768ed24 - Btrfs stable updates. Pending or future 3.16.y fixes - Btrfs: read lock extent buffer while walking backrefs. - Btrfs: fix compressed write corruption on enospc. - Btrfs: fix csum tree corruption, duplicate and outdated checksums. - Btrfs: fill_holes: Fix slot number passed to hole_mergeable() call. - Btrfs: fix wrong write range for filemap_fdatawrite_range(). - Btrfs: fix wrong extent mapping for DirectIO. - btrfs: Return right extent when fiemap gives unaligned offset and len. - Btrfs: ensure tmpfile inode is always persisted with link count of 0. - Btrfs: don't monopolize a core when evicting inode. - Btrfs: fix task hang under heavy compressed write. - Refresh patches.fixes/Btrfs-Fix-memory-corruption-by-ulist_add_merge-on-32. - commit c40eb71 - Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch (bnc#887046). - commit b1e2a41 - rpm/kernel-binary.spec.in: Fix the version variables in the generated Makefile (bnc#892973) - commit 8331f47 - rpm/compress-vmlinux.sh: Do not duplicate the job of brp-99-compress-vmlinux - commit e561498 - config: arm64: Enable RTC_DRV_HID_SENSOR_TIME For consistency across ARM configs. This drags in IIO. For consistency, in turn use: CONFIG_IIO_SIMPLE_DUMMY=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_HID_SENSOR_*=m - commit 7a6e5f7 - config: armv6hl: Re-enable DWC2 USB support The config update/cleanup for v3.16-rc3 mistakenly disabled USB_DWC2, which is needed for the Raspberry Pi. Fixes: d2f49e165ca3 ("config: armv6hl: Update config for 3.16-rc3") - commit cc9f241 - config: ARM: Change RTC drivers to built-in Consistently do not build RTC drivers as modules. This fixes subtle differences between armv7hl default and lpae flavors and avoids any timing-related driver initialization issues. To make RTC_DRV_88PM80X built-in, make MFD_88PM800 built-in, too. To make RTC_DRV_PM8XXX built-in, make MFD_PM8921_CORE built-in, too. - commit cf526c8 - rpm/config.sh: Drop the ARM repo, it is covered by the ports repo - commit 84ffa90 - rpm/kernel-binary.spec.in: Fix missing quotes around %build_flavor %build_flavor can be an arbitrary string, so it needs to be quoted for string comparison. - commit 0134440 - rpm/kernel-obs-build.spec.in: Use dracut for SLE12 - commit ec64eaf - config: armv6hl: Enable DMA_BCM2835 Only bcm2835 option missing. - commit 1fd2cdd - config: armv7hl: Enable DWMAC_SUNXI for lpae flavor as well Without this, the Cubietruck has no network in LPAE mode. - commit 4f16280 - Linux 3.16.1. - commit 9353bcb - Revert "config: armv7hl: Disable OMAP DRM" This reverts commit f92487dbd7a305531e4cc54c41609b8f77a1bc30. The previous commit should fix the build error of omapdrm. - commit 07174c1 - drm: omapdrm: fix compiler errors. - commit ee3abc8 - config: armv7hl: Disable OMAP DRM To avoid errors such as: ../drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format=] DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, ^ ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format=] cc1: all warnings being treated as errors disable OMAP DRM for now. Two patches were sent upstream by Matwey V. Kornilov but didn't find their way into v3.16. Once patches are applied, revert this commit. - commit f92487d - config: arm64: Disable ARM64 crypto extensions To avoid build errors such as: ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory ../scripts/Makefile.build:411: recipe for target 'arch/arm64/crypto/aes-ce-blk.o' failed disable support for ARM64 crypto extensions for now. A patch was submitted upstream by Andreas Schwab but didn't make it into v3.16. Once that is available, this commit should be reverted. - commit 5f99cfd - config: arm64/default: make rtc-pl03[01] built-in - commit 1b1d9da - rtsx_usb: export device table (bnc#890096). - commit a29135e - Delete patches.drivers/drm-cirrus-Use-16bpp-as-default (bnc#890599). - commit 820d92f ==== kernel-docs ==== Version update (3.16.0 -> 3.16.1) - rpm/config.sh Use the same repository setup as the master branch - commit 90bc0f1 - rpm/config.sh: build against factory - commit 768ed24 - Btrfs stable updates. Pending or future 3.16.y fixes - Btrfs: read lock extent buffer while walking backrefs. - Btrfs: fix compressed write corruption on enospc. - Btrfs: fix csum tree corruption, duplicate and outdated checksums. - Btrfs: fill_holes: Fix slot number passed to hole_mergeable() call. - Btrfs: fix wrong write range for filemap_fdatawrite_range(). - Btrfs: fix wrong extent mapping for DirectIO. - btrfs: Return right extent when fiemap gives unaligned offset and len. - Btrfs: ensure tmpfile inode is always persisted with link count of 0. - Btrfs: don't monopolize a core when evicting inode. - Btrfs: fix task hang under heavy compressed write. - Refresh patches.fixes/Btrfs-Fix-memory-corruption-by-ulist_add_merge-on-32. - commit c40eb71 - Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch (bnc#887046). - commit b1e2a41 - rpm/kernel-binary.spec.in: Fix the version variables in the generated Makefile (bnc#892973) - commit 8331f47 - rpm/compress-vmlinux.sh: Do not duplicate the job of brp-99-compress-vmlinux - commit e561498 - config: arm64: Enable RTC_DRV_HID_SENSOR_TIME For consistency across ARM configs. This drags in IIO. For consistency, in turn use: CONFIG_IIO_SIMPLE_DUMMY=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_HID_SENSOR_*=m - commit 7a6e5f7 - config: armv6hl: Re-enable DWC2 USB support The config update/cleanup for v3.16-rc3 mistakenly disabled USB_DWC2, which is needed for the Raspberry Pi. Fixes: d2f49e165ca3 ("config: armv6hl: Update config for 3.16-rc3") - commit cc9f241 - config: ARM: Change RTC drivers to built-in Consistently do not build RTC drivers as modules. This fixes subtle differences between armv7hl default and lpae flavors and avoids any timing-related driver initialization issues. To make RTC_DRV_88PM80X built-in, make MFD_88PM800 built-in, too. To make RTC_DRV_PM8XXX built-in, make MFD_PM8921_CORE built-in, too. - commit cf526c8 - rpm/config.sh: Drop the ARM repo, it is covered by the ports repo - commit 84ffa90 - rpm/kernel-binary.spec.in: Fix missing quotes around %build_flavor %build_flavor can be an arbitrary string, so it needs to be quoted for string comparison. - commit 0134440 - rpm/kernel-obs-build.spec.in: Use dracut for SLE12 - commit ec64eaf - config: armv6hl: Enable DMA_BCM2835 Only bcm2835 option missing. - commit 1fd2cdd - config: armv7hl: Enable DWMAC_SUNXI for lpae flavor as well Without this, the Cubietruck has no network in LPAE mode. - commit 4f16280 - Linux 3.16.1. - commit 9353bcb - Revert "config: armv7hl: Disable OMAP DRM" This reverts commit f92487dbd7a305531e4cc54c41609b8f77a1bc30. The previous commit should fix the build error of omapdrm. - commit 07174c1 - drm: omapdrm: fix compiler errors. - commit ee3abc8 - config: armv7hl: Disable OMAP DRM To avoid errors such as: ../drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format=] DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, ^ ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format=] cc1: all warnings being treated as errors disable OMAP DRM for now. Two patches were sent upstream by Matwey V. Kornilov but didn't find their way into v3.16. Once patches are applied, revert this commit. - commit f92487d - config: arm64: Disable ARM64 crypto extensions To avoid build errors such as: ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory ../scripts/Makefile.build:411: recipe for target 'arch/arm64/crypto/aes-ce-blk.o' failed disable support for ARM64 crypto extensions for now. A patch was submitted upstream by Andreas Schwab but didn't make it into v3.16. Once that is available, this commit should be reverted. - commit 5f99cfd - config: arm64/default: make rtc-pl03[01] built-in - commit 1b1d9da - rtsx_usb: export device table (bnc#890096). - commit a29135e - Delete patches.drivers/drm-cirrus-Use-16bpp-as-default (bnc#890599). - commit 820d92f ==== kernel-devel ==== Version update (3.16.0 -> 3.16.1) Subpackages: kernel-source - rpm/config.sh Use the same repository setup as the master branch - commit 90bc0f1 - rpm/config.sh: build against factory - commit 768ed24 - Btrfs stable updates. Pending or future 3.16.y fixes - Btrfs: read lock extent buffer while walking backrefs. - Btrfs: fix compressed write corruption on enospc. - Btrfs: fix csum tree corruption, duplicate and outdated checksums. - Btrfs: fill_holes: Fix slot number passed to hole_mergeable() call. - Btrfs: fix wrong write range for filemap_fdatawrite_range(). - Btrfs: fix wrong extent mapping for DirectIO. - btrfs: Return right extent when fiemap gives unaligned offset and len. - Btrfs: ensure tmpfile inode is always persisted with link count of 0. - Btrfs: don't monopolize a core when evicting inode. - Btrfs: fix task hang under heavy compressed write. - Refresh patches.fixes/Btrfs-Fix-memory-corruption-by-ulist_add_merge-on-32. - commit c40eb71 - Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch (bnc#887046). - commit b1e2a41 - rpm/kernel-binary.spec.in: Fix the version variables in the generated Makefile (bnc#892973) - commit 8331f47 - rpm/compress-vmlinux.sh: Do not duplicate the job of brp-99-compress-vmlinux - commit e561498 - config: arm64: Enable RTC_DRV_HID_SENSOR_TIME For consistency across ARM configs. This drags in IIO. For consistency, in turn use: CONFIG_IIO_SIMPLE_DUMMY=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_HID_SENSOR_*=m - commit 7a6e5f7 - config: armv6hl: Re-enable DWC2 USB support The config update/cleanup for v3.16-rc3 mistakenly disabled USB_DWC2, which is needed for the Raspberry Pi. Fixes: d2f49e165ca3 ("config: armv6hl: Update config for 3.16-rc3") - commit cc9f241 - config: ARM: Change RTC drivers to built-in Consistently do not build RTC drivers as modules. This fixes subtle differences between armv7hl default and lpae flavors and avoids any timing-related driver initialization issues. To make RTC_DRV_88PM80X built-in, make MFD_88PM800 built-in, too. To make RTC_DRV_PM8XXX built-in, make MFD_PM8921_CORE built-in, too. - commit cf526c8 - rpm/config.sh: Drop the ARM repo, it is covered by the ports repo - commit 84ffa90 - rpm/kernel-binary.spec.in: Fix missing quotes around %build_flavor %build_flavor can be an arbitrary string, so it needs to be quoted for string comparison. - commit 0134440 - rpm/kernel-obs-build.spec.in: Use dracut for SLE12 - commit ec64eaf - config: armv6hl: Enable DMA_BCM2835 Only bcm2835 option missing. - commit 1fd2cdd - config: armv7hl: Enable DWMAC_SUNXI for lpae flavor as well Without this, the Cubietruck has no network in LPAE mode. - commit 4f16280 - Linux 3.16.1. - commit 9353bcb - Revert "config: armv7hl: Disable OMAP DRM" This reverts commit f92487dbd7a305531e4cc54c41609b8f77a1bc30. The previous commit should fix the build error of omapdrm. - commit 07174c1 - drm: omapdrm: fix compiler errors. - commit ee3abc8 - config: armv7hl: Disable OMAP DRM To avoid errors such as: ../drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format=] DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, ^ ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format=] cc1: all warnings being treated as errors disable OMAP DRM for now. Two patches were sent upstream by Matwey V. Kornilov but didn't find their way into v3.16. Once patches are applied, revert this commit. - commit f92487d - config: arm64: Disable ARM64 crypto extensions To avoid build errors such as: ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory ../scripts/Makefile.build:411: recipe for target 'arch/arm64/crypto/aes-ce-blk.o' failed disable support for ARM64 crypto extensions for now. A patch was submitted upstream by Andreas Schwab but didn't make it into v3.16. Once that is available, this commit should be reverted. - commit 5f99cfd - config: arm64/default: make rtc-pl03[01] built-in - commit 1b1d9da - rtsx_usb: export device table (bnc#890096). - commit a29135e - Delete patches.drivers/drm-cirrus-Use-16bpp-as-default (bnc#890599). - commit 820d92f ==== kernel-syms ==== Version update (3.16.0 -> 3.16.1) - rpm/config.sh Use the same repository setup as the master branch - commit 90bc0f1 - rpm/config.sh: build against factory - commit 768ed24 - Btrfs stable updates. Pending or future 3.16.y fixes - Btrfs: read lock extent buffer while walking backrefs. - Btrfs: fix compressed write corruption on enospc. - Btrfs: fix csum tree corruption, duplicate and outdated checksums. - Btrfs: fill_holes: Fix slot number passed to hole_mergeable() call. - Btrfs: fix wrong write range for filemap_fdatawrite_range(). - Btrfs: fix wrong extent mapping for DirectIO. - btrfs: Return right extent when fiemap gives unaligned offset and len. - Btrfs: ensure tmpfile inode is always persisted with link count of 0. - Btrfs: don't monopolize a core when evicting inode. - Btrfs: fix task hang under heavy compressed write. - Refresh patches.fixes/Btrfs-Fix-memory-corruption-by-ulist_add_merge-on-32. - commit c40eb71 - Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch (bnc#887046). - commit b1e2a41 - rpm/kernel-binary.spec.in: Fix the version variables in the generated Makefile (bnc#892973) - commit 8331f47 - rpm/compress-vmlinux.sh: Do not duplicate the job of brp-99-compress-vmlinux - commit e561498 - config: arm64: Enable RTC_DRV_HID_SENSOR_TIME For consistency across ARM configs. This drags in IIO. For consistency, in turn use: CONFIG_IIO_SIMPLE_DUMMY=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_HID_SENSOR_*=m - commit 7a6e5f7 - config: armv6hl: Re-enable DWC2 USB support The config update/cleanup for v3.16-rc3 mistakenly disabled USB_DWC2, which is needed for the Raspberry Pi. Fixes: d2f49e165ca3 ("config: armv6hl: Update config for 3.16-rc3") - commit cc9f241 - config: ARM: Change RTC drivers to built-in Consistently do not build RTC drivers as modules. This fixes subtle differences between armv7hl default and lpae flavors and avoids any timing-related driver initialization issues. To make RTC_DRV_88PM80X built-in, make MFD_88PM800 built-in, too. To make RTC_DRV_PM8XXX built-in, make MFD_PM8921_CORE built-in, too. - commit cf526c8 - rpm/config.sh: Drop the ARM repo, it is covered by the ports repo - commit 84ffa90 - rpm/kernel-binary.spec.in: Fix missing quotes around %build_flavor %build_flavor can be an arbitrary string, so it needs to be quoted for string comparison. - commit 0134440 - rpm/kernel-obs-build.spec.in: Use dracut for SLE12 - commit ec64eaf - config: armv6hl: Enable DMA_BCM2835 Only bcm2835 option missing. - commit 1fd2cdd - config: armv7hl: Enable DWMAC_SUNXI for lpae flavor as well Without this, the Cubietruck has no network in LPAE mode. - commit 4f16280 - Linux 3.16.1. - commit 9353bcb - Revert "config: armv7hl: Disable OMAP DRM" This reverts commit f92487dbd7a305531e4cc54c41609b8f77a1bc30. The previous commit should fix the build error of omapdrm. - commit 07174c1 - drm: omapdrm: fix compiler errors. - commit ee3abc8 - config: armv7hl: Disable OMAP DRM To avoid errors such as: ../drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format=] DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, ^ ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format=] cc1: all warnings being treated as errors disable OMAP DRM for now. Two patches were sent upstream by Matwey V. Kornilov but didn't find their way into v3.16. Once patches are applied, revert this commit. - commit f92487d - config: arm64: Disable ARM64 crypto extensions To avoid build errors such as: ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory ../scripts/Makefile.build:411: recipe for target 'arch/arm64/crypto/aes-ce-blk.o' failed disable support for ARM64 crypto extensions for now. A patch was submitted upstream by Andreas Schwab but didn't make it into v3.16. Once that is available, this commit should be reverted. - commit 5f99cfd - config: arm64/default: make rtc-pl03[01] built-in - commit 1b1d9da - rtsx_usb: export device table (bnc#890096). - commit a29135e - Delete patches.drivers/drm-cirrus-Use-16bpp-as-default (bnc#890599). - commit 820d92f ==== kernel-xen ==== Version update (3.16.0 -> 3.16.1) Subpackages: kernel-xen-devel - rpm/config.sh Use the same repository setup as the master branch - commit 90bc0f1 - rpm/config.sh: build against factory - commit 768ed24 - Btrfs stable updates. Pending or future 3.16.y fixes - Btrfs: read lock extent buffer while walking backrefs. - Btrfs: fix compressed write corruption on enospc. - Btrfs: fix csum tree corruption, duplicate and outdated checksums. - Btrfs: fill_holes: Fix slot number passed to hole_mergeable() call. - Btrfs: fix wrong write range for filemap_fdatawrite_range(). - Btrfs: fix wrong extent mapping for DirectIO. - btrfs: Return right extent when fiemap gives unaligned offset and len. - Btrfs: ensure tmpfile inode is always persisted with link count of 0. - Btrfs: don't monopolize a core when evicting inode. - Btrfs: fix task hang under heavy compressed write. - Refresh patches.fixes/Btrfs-Fix-memory-corruption-by-ulist_add_merge-on-32. - commit c40eb71 - Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch (bnc#887046). - commit b1e2a41 - rpm/kernel-binary.spec.in: Fix the version variables in the generated Makefile (bnc#892973) - commit 8331f47 - rpm/compress-vmlinux.sh: Do not duplicate the job of brp-99-compress-vmlinux - commit e561498 - config: arm64: Enable RTC_DRV_HID_SENSOR_TIME For consistency across ARM configs. This drags in IIO. For consistency, in turn use: CONFIG_IIO_SIMPLE_DUMMY=m CONFIG_HID_SENSOR_IIO_TRIGGER=m CONFIG_IIO_PERIODIC_RTC_TRIGGER=m CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_IIO_BUFFER=y CONFIG_IIO_KFIFO_BUF=m CONFIG_HID_SENSOR_*=m - commit 7a6e5f7 - config: armv6hl: Re-enable DWC2 USB support The config update/cleanup for v3.16-rc3 mistakenly disabled USB_DWC2, which is needed for the Raspberry Pi. Fixes: d2f49e165ca3 ("config: armv6hl: Update config for 3.16-rc3") - commit cc9f241 - config: ARM: Change RTC drivers to built-in Consistently do not build RTC drivers as modules. This fixes subtle differences between armv7hl default and lpae flavors and avoids any timing-related driver initialization issues. To make RTC_DRV_88PM80X built-in, make MFD_88PM800 built-in, too. To make RTC_DRV_PM8XXX built-in, make MFD_PM8921_CORE built-in, too. - commit cf526c8 - rpm/config.sh: Drop the ARM repo, it is covered by the ports repo - commit 84ffa90 - rpm/kernel-binary.spec.in: Fix missing quotes around %build_flavor %build_flavor can be an arbitrary string, so it needs to be quoted for string comparison. - commit 0134440 - rpm/kernel-obs-build.spec.in: Use dracut for SLE12 - commit ec64eaf - config: armv6hl: Enable DMA_BCM2835 Only bcm2835 option missing. - commit 1fd2cdd - config: armv7hl: Enable DWMAC_SUNXI for lpae flavor as well Without this, the Cubietruck has no network in LPAE mode. - commit 4f16280 - Linux 3.16.1. - commit 9353bcb - Revert "config: armv7hl: Disable OMAP DRM" This reverts commit f92487dbd7a305531e4cc54c41609b8f77a1bc30. The previous commit should fix the build error of omapdrm. - commit 07174c1 - drm: omapdrm: fix compiler errors. - commit ee3abc8 - config: armv7hl: Disable OMAP DRM To avoid errors such as: ../drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format=] DBG("%d,%d %08x %08x", info->pos_x, info->pos_y, ^ ../drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format=] cc1: all warnings being treated as errors disable OMAP DRM for now. Two patches were sent upstream by Matwey V. Kornilov but didn't find their way into v3.16. Once patches are applied, revert this commit. - commit f92487d - config: arm64: Disable ARM64 crypto extensions To avoid build errors such as: ld: cannot find arch/arm64/crypto/aes-glue-ce.o: No such file or directory ../scripts/Makefile.build:411: recipe for target 'arch/arm64/crypto/aes-ce-blk.o' failed disable support for ARM64 crypto extensions for now. A patch was submitted upstream by Andreas Schwab but didn't make it into v3.16. Once that is available, this commit should be reverted. - commit 5f99cfd - config: arm64/default: make rtc-pl03[01] built-in - commit 1b1d9da - rtsx_usb: export device table (bnc#890096). - commit a29135e - Delete patches.drivers/drm-cirrus-Use-16bpp-as-default (bnc#890599). - commit 820d92f ==== kiwi ==== Version update (5.06.155 -> 5.06.157) Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools - v5.06.157 released - Fixed KIWIOVFConfigWriter rasd:HostResource for ovf:/disk The reference ID was set to a wrong value not matching the ovf:DiskSection section - Fixed creation of virtualbox vagrant boxes Add hardlink box-disk1.vmdk to real vmdk image in box tarball - Cleanup KIWIOVFConfigWriter Prevent use of uninitialized values - Update vagrant example for virtualbox - Added missing format attribute in ovf:DiskSection in config writer - v5.06.156 released - Allow bootloader setup to run on aarch64 for grub2 and uboot (bnc #894214) - Added virtualbox-guest-tools in suse-13.1 vagrant example - Fixed broken ovf:href for image file Within the vagrant virtualbox box creation the vmdk file was renamed but this action broke the reference to that file inside the ovf config file - Prevent creation of custom /etc/ImagePackages in netboot The information there is created at image creation time already and the call increases the first boot time. This fixes (bnc #893776) - Make sure kiwi initrd creates /run/log dracut stores its log file there ==== libHX28 ==== Version update (3.21 -> 3.22) Subpackages: libHX28-32bit - Update to new upstream release 3.22 * HX_strquote() now supports the HXQUOTE_SQLBQUOTE mechanism ==== libquvi-scripts ==== Version update (0.9.20130805 -> 0.9.20131130) - Add luasocket Requires: Various scripts require lua sockets (like youtube, bnc#863126). - Update to 0.9.20131130: + Many bugfixes. Please see NEWS for details. ==== libwebp5 ==== Version update (0.4.0 -> 0.4.1) Subpackages: libwebpmux1 - Update to new upstream release 0.4.1 * AArch64 (arm64) & MIPS support/optimizations * NEON assembly additions: ~25% faster lossy decode/encode (-m 4); ~10% faster lossless decode;~5-10% faster lossless encode (-m 3/4) * dwebp/vwebp can read from stdin * cwebp/gif2webp can write to stdout * cwebp can read webp files; useful if storing sources as webp lossless ==== libyui6 ==== Version update (3.1.3 -> 3.1.4) - The default product name should be "SUSE Linux" (bnc#886608) - 3.1.4 - Detect lib64 in a Debian compatible way, for Travis CI. ==== libyui-qt-pkg6 ==== Version update (2.44.6 -> 2.44.7) - Really added the libqdiagsolver conflict (bnc#870683, bnc#866622). - 2.44.7 ==== libzypp ==== Version update (14.27.1 -> 14.27.2) - PackageProvider: consider toplevel cache if --root or --pkg-cachedir is used. - Cleanup orpahned cache dirs only at zypp.conf default locations (bnc#891515) - Remove orphaned package caches on refresh (bnc#888919) - version 14.27.2 (27) - Update zypp-po.tar.bz2 - Update zypp-po.tar.bz2 ==== libmysqlclient18-32bit ==== Version update (10.0.12 -> 10.0.13) - fix privileges as a last step of upgrade - Update to 10.0.13 * Release notes: http://kb.askmonty.org/v/mariadb-10013-release-notes * Changelog: http://kb.askmonty.org/v/mariadb-10013-changelog ==== libmenu-cache3 ==== Version update (0.6.0 -> 0.6.1) Subpackages: menu-cache - new upstream version 0.6.1 * Fixed invalid memory access after cache reload. * A little cleanup of dist tarball: removed unused files menu-cache.h and libmenu-cache-uninstalled.pc.in. ==== libmysqlcppconn6 ==== - Use cmake macros for building properly. - disable gcov coverage recording Gcov is a development tool, it slows down execution and creates coverage data that is not useful to users of this library. ==== obs-service-format_spec_file ==== Version update (0.4.2 -> 20140825) - updated to SPDX License List v1.20 - cleaned up the SUSE specific list and moved to tar_scm service ==== ocaml ==== Subpackages: ocaml-compiler-libs ocaml-runtime - Require as/gcc for ocamlopt (bnc#891177) ==== os-prober ==== - requires util-linux-systemd (bnc#892337) ==== patterns-openSUSE-apparmor ==== Subpackages: patterns-openSUSE-apparmor_opt patterns-openSUSE-base patterns-openSUSE-books patterns-openSUSE-console patterns-openSUSE-devel_C_C++ patterns-openSUSE-devel_basis patterns-openSUSE-devel_gnome patterns-openSUSE-devel_ide patterns-openSUSE-devel_java patterns-openSUSE-devel_kde patterns-openSUSE-devel_kernel patterns-openSUSE-devel_mono patterns-openSUSE-devel_perl patterns-openSUSE-devel_python patterns-openSUSE-devel_qt4 patterns-openSUSE-devel_rpm_build patterns-openSUSE-devel_ruby patterns-openSUSE-devel_tcl patterns-openSUSE-devel_web patterns-openSUSE-dhcp_dns_server patterns-openSUSE-directory_server patterns-openSUSE-enhanced_base patterns-openSUSE-enhanced_base_opt patterns-openSUSE-file_server patterns-openSUSE-fonts patterns-openSUSE-fonts_opt patterns-openSUSE-games patterns-openSUSE-gateway_server patterns-openSUSE-gnome patterns-openSUSE-gnome_admin patterns-openSUSE-gnome_basis patterns-openSUSE-gnome_basis_opt patterns-openSUSE-gnome_games patterns-openSUSE-gnome_ide patterns-openSUSE-gnome_imaging patterns-openSUSE-gnome_imaging_opt patterns-openSUSE-gnome_internet patterns-openSUSE-gnome_laptop patterns-openSUSE-gnome_multimedia patterns-openSUSE-gnome_multimedia_opt patterns-openSUSE-gnome_office patterns-openSUSE-gnome_office_opt patterns-openSUSE-gnome_utilities patterns-openSUSE-gnome_yast patterns-openSUSE-imaging patterns-openSUSE-imaging_opt patterns-openSUSE-kde patterns-openSUSE-kde4_admin patterns-openSUSE-kde4_basis patterns-openSUSE-kde4_edutainment patterns-openSUSE-kde4_games patterns-openSUSE-kde4_ide patterns-openSUSE-kde4_imaging patterns-openSUSE-kde4_internet patterns-openSUSE-kde4_laptop patterns-openSUSE-kde4_multimedia patterns-openSUSE-kde4_office patterns-openSUSE-kde4_utilities patterns-openSUSE-kde4_utilities_opt patterns-openSUSE-kde4_yast patterns-openSUSE-kvm_server patterns-openSUSE-lamp_server patterns-openSUSE-laptop patterns-openSUSE-lxde patterns-openSUSE-lxde_laptop patterns-openSUSE-lxde_office patterns-openSUSE-mail_server patterns-openSUSE-minimal_base patterns-openSUSE-minimal_base-conflicts patterns-openSUSE-misc_server patterns-openSUSE-multimedia patterns-openSUSE-multimedia_opt patterns-openSUSE-network_admin patterns-openSUSE-non_oss patterns-openSUSE-non_oss_opt patterns-openSUSE-office patterns-openSUSE-office_opt patterns-openSUSE-print_server patterns-openSUSE-remote_desktop patterns-openSUSE-rest_dvd patterns-openSUSE-sw_management patterns-openSUSE-sw_management_gnome patterns-openSUSE-sw_management_kde4 patterns-openSUSE-tabletpc patterns-openSUSE-technical_writing patterns-openSUSE-x11 patterns-openSUSE-x11_opt patterns-openSUSE-x11_yast patterns-openSUSE-xen_server patterns-openSUSE-xfce patterns-openSUSE-xfce_basis patterns-openSUSE-xfce_laptop patterns-openSUSE-xfce_office patterns-openSUSE-yast2_basis patterns-openSUSE-yast2_install_wf - add iproute2 to minimal pattern - xfce_laptop: remove xfce4-panel-plugin-brightness which has been merged into xfce4-panel-plugin-power-manager and is installed through xfce4-panel-branding-openSUSE - package lxde * recommend gcolor2, currently one have to open a graphics program just to pick a color - Replace tightvnc with tigervnc as default VNC client. (bnc#879917) - Add a Plasma 5 pattern. Mostly a copy of kde4_basis, with exceptions where needed - Update kde_devel pattern: no longer recommend gstreamer_0.10, but standard one ==== apache2-mod_php5 ==== Version update (5.5.16 -> 5.6.0) Subpackages: php5 php5-bcmath php5-bz2 php5-calendar php5-ctype php5-curl php5-dba php5-devel php5-dom php5-exif php5-fastcgi php5-ftp php5-gd php5-gettext php5-gmp php5-iconv php5-imap php5-json php5-ldap php5-mbstring php5-mcrypt php5-mysql php5-odbc php5-openssl php5-pdo php5-pear php5-pgsql php5-shmop php5-snmp php5-sockets php5-sqlite php5-suhosin php5-sysvsem php5-sysvshm php5-tidy php5-tokenizer php5-wddx php5-xmlreader php5-xmlwriter php5-xsl php5-zip php5-zlib - fix CVE-2014-5459 [bnc#893849] - actually, there's no point to install pear from other source than from php tarball * remove source install-pear-nozlib.phar - updated PEAR to 1.9.5, bugfix release see http://pear.php.net/package/PEAR/download for details - updated to 5.6.0: * Most improvements in PHP 5.6.x have no impact on existing code. There are a few incompatibilities and new features that should be considered: http://php.net/manual/en/migration56.php - removed patches: * php5-big-file-upload.patch (upstreamed) * php5-suhosin-php55.patch (upstreamed) - modified patches: * php5-openssl.patch (refreshed) ==== scons ==== Version update (2.3.2 -> 2.3.3) - SCons 2.3.3: * New functionality: - Added Copy Action symlink soft-copy support * Changed/Enhanced existing functionality: - Improved SWIG detection * Fixes: - Fix regression on Windows in D language update - Fixed the newglossary action to work with VariantDir (LaTeX). - Added a default for the BUILDERS environment variable, to prevent not defined exception on a Clone(). - Fixed handling of CPPDEFINE var in Append() for several list-dict combinations - Remove scons-2.3.2-python.patch, committed upstream ==== libsqlite3-0 ==== Version update (3.8.5 -> 3.8.6) Subpackages: libsqlite3-0-32bit sqlite3 sqlite3-devel sqlite3-doc - SQLite 3.8.6 * Added support for hexadecimal integer literals in the SQL parser. (Ex: 0x123abc) * Enhanced the PRAGMA integrity_check command to detect UNIQUE and NOT NULL constraint violations. * Increase the maximum value of SQLITE_MAX_ATTACHED from 62 to 125. * Increase the timeout in WAL mode before issuing an SQLITE_PROTOCOL error from 1 second to 10 seconds. * Added the likely(X) SQL function. * The unicode61 tokenizer is now included in FTS4 by default. * Trigger automatic reprepares on all prepared statements when ANALYZE is run. * Added a new loadable extension source code file to the source tree: fileio.c * Add extension functions readfile(X) and writefile(X,Y) (using code copy/pasted from fileio.c in the previous bullet) to the command-line shell. * Added the .fullschema dot-command to the command-line shell. * performance enhancements * bug fixes ==== tar ==== - Improve on RPM group classification ==== libtelepathy-glib0 ==== Version update (0.24.0 -> 0.24.1) Subpackages: typelib-1_0-TelepathyGlib-0_12 - Update to version 0.24.1: + Fixes: - base-client: fix potential uninitialized variable bug. - Fix a potential crash in contact-list example (fdo#79006). ==== valgrind ==== Subpackages: valgrind-devel - update for ppc64le support (bnc#880334): - drop: valgrind-3.9.0-merge.patches.from.Paul.McKenney.patch, valgrind-3.9.0-ppc64le-abiv2.patch - add: VEX-r2803.diff, VEX-r2808.diff, VEX-r2816.diff VEX-r2904.diff, VEX-r2910.diff, VEX-r2914.diff, VEX-r2915.diff, VEX-r2916.diff, r13767.diff, r13770.diff, r14184.diff, r14238.diff, r14239.diff, r14240.diff, r14246.diff ==== yast2 ==== Version update (3.1.101 -> 3.1.102) Subpackages: yast2-devel-doc - Lazy-loading SuSEfirewall2 services - some new services can be added when Yast is already running, and the config has been read already (bnc#872960) - Preventing from showing incorrect service name or description if they are coming from TEMPLATE file (bnc#893583) - Fixed service file parsing - comments starting with more than one '#' characters were reported as unexpected input (just warning) - 3.1.102 ==== yast2-bootloader ==== Version update (3.1.89 -> 3.1.91) - do not reset secure boot to false at the end of installation in case of incapable device (bnc#892032) - 3.1.91 - fix partition activation on LVM (bnc#893449) - fix activation device when md raid devices do not have recognizable bios id - 3.1.90 ==== yast2-http-server ==== Version update (3.1.1 -> 3.1.2) - Autoyast conifuration: "main" defines the default server configured in /etc/apache2/default-server.conf. This has already been defined in YaPI::HTTPD and has to be updated only. (bnc#893100) - 3.1.2 ==== yast2-installation ==== Version update (3.1.109 -> 3.1.113) - Setting data for &product; macro (used in helps) as soon as the base-product repository is initialized (bnc#886608) - 3.1.113 - Fixed [Abort] button handling in Disks Activation dialog (bnc#893281) - 3.1.112 - Autoyast: Second stage will not be called at all. This bug has been generated due the fix in bnc#886464. - 3.1.111 - Autoyast - - Disabling second installation stage via autoyast configuration "second_stage". - - Centralized minimal configuration and disabling more configuration steps like X11, user, default_desktop,... - - bnc#886464 and bnc#892091 - 3.1.110 ==== yast2-users ==== Version update (3.1.30 -> 3.1.31) - Autoyast: Moved minimal configuration to a central place in inst_finish. (bnc#886464) - 3.1.31 ==== zsh ==== Version update (5.0.5 -> 5.0.6) - Update to version 5.0.6 * See included ChangeLog - Remove zsh-update-zypper-completion.patch, fixed upstream ==== zypper ==== Version update (1.11.11 -> 1.11.12) Subpackages: zypper-aptitude zypper-log - download: use $XDG_CACHE_HOME/zypp/packages for non-root user (bnc#891515) - download --dry-run: list packages we would download - Accept -f,--force option with refresh-services(refs) - version 1.11.12 - Update zypper-po.tar.bz2 - Update zypper-po.tar.bz2 - Update zypper-po.tar.bz2 Removed packages: pixz Added packages: gcolor2 luasocket